Hiding Single Points For The Machining Process - HEIDENHAIN TNC 620 User Manual

Subprograms and program section repeats | Point tables
Configuring the point table display
To configure the display of a point table:
Open the desired point table
Further information: "Creating a point table", Page 254
Press the SORT/ HIDE COLUMNS soft key
The control opens the Column sequence
window.
Configure how the table will be displayed
Press the OK soft key
The control will display the table as defined in the
selected configuration.
If you enter the code number 555343, the control will
display the EDIT FORMAT soft key. With this soft key, you
can change the table properties.

Hiding single points for the machining process

In the FADE column of the point table, you can specify if the defined
point is to be hidden during the machining process.
To hide points:
Select the desired point from the table
Select the FADE column
Activate hiding with the ENT key
Deactivate hiding with the NO ENT key
NO
ENT
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
8
255