HEIDENHAIN TNC 620 User Manual page 585

Tables and overviews | System data
Group Group number
name ID...
Values programmed in the tool call (system string)
10060
Read machine kinematics (system strings)
10290
Traverse range switchover (system string)
10300
Read current system time (system string)
10321
Read data of touch probes (TS, TT) (system string)
10350
Read and write data of touch probes (TS, TT) (system string)
10350
Read the data for pallet machining (system string)
10510
Read version ID of the NC software (system string)
10630
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
System data Index IDX...
number NO....
1 -
10 -
1 -
1 - 16 -
50 -
70 -
73 -
74 -
1 -
2 -
10 -
Description
Tool name
Symbolic name of the machine kinemat-
ics from Channels/ChannelSettings/CfgKin-
List/kinCompositeModels programmed in
FUNCTION MODE MILL or FUNCTION MODE
TURN.
Key name of the last active range of traverse
1: DD.MM.YYYY hh:mm:ss
2: D.MM.YYYY h:mm
3: DD.MM.YY hh:mm
4: YYYY-MM-DD hh:mm:ss
5: YYYY-MM-DD hh:mm
6: YYYY-MM-DD h:mm
7: YY-MM-DD h:mm
8: DD.MM.YYYY
9: D.MM.YYYY
10: D.MM.YY
11: YYYY-MM-DD
12: YY-MM-DD
13: hh:mm:ss
14: h:mm:ss
15: h:mm
16: DD.MM.YYYY hh:mm
20: Calender week as per ISO 8601
As an alternative, you can use DAT in
SYSSTR(...) to specify a system time in
seconds that is to be used for formatting.
Type of TS probe from TYPE column of the
touch probe table (tchprobe.tp)
Type of TT tool touch probe from CfgTT/type.
Key name of the active tool touch probe TT
from CfgProbes/activeTT.
Serial number of the active tool touch probe
TT from CfgProbes/activeTT.
Pallet name
Path of the selected pallet table.
The string corresponds to the format of
the version ID shown, e.g. 340590 09 or
817601 05 SP1.
15
585