HEIDENHAIN TNC 620 User Manual page 580

15
Group Group number
name ID...
580
System data Index IDX...
number NO....
16 0
1
19 -
Tables and overviews | System data
Description
replacement tool will be returned.
–1: No tool with the specified name found in
the tool table or all qualifying tools are locked.
0 = Transfer control over the channel spindle
to the PLC,
1 = Assume control over the channel spindle
0 = Pass tool spindle control to the PLC,
1 = Take control of the tool spindle
Suppress touch prove movement in cycles:
0 = Movement will be suppressed (CfgMa-
chineSimul/simMode parameter not equal to
FullOperation or Test Run operating mode is
active)
1 = Movement will be performed (CfgMa-
chineSimul/simMode parameter = FullOpera-
tion, can be programmed for testing purpos-
es)
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022