HEIDENHAIN TNC 620 User Manual page 41

Basic information | Control model, software and features
Use the TRANS MIRROR function to mirror contours or positions
about one or more axes. The TRANS MIRROR RESET function
allows you to reset the mirroring. The NC functions serve as an
alternative to Cycle 8 MIRRORING.
Further information: "Mirroring with TRANS MIRROR",
Page 385
With the TRANS SCALE function, you can scale contours or
positions and thus enlarge or reduce these uniformly. This
enables you to program shrinkage and oversize allowances, for
example. Use the TRANS SCALE RESET function to reset the
scaling. The NC functions serve as an alternative to Cycle 11
SCALING FACTOR.
Further information: "Scaling with TRANS SCALE", Page 389
Using the SYNTAX soft key, you can enclose path information in
quotation marks in order to use any special characters as part of
the path, e.g. /. The control provides the SYNTAX soft key with the
following NC functions:
Cycle 12 PGM CALL (ISO: G39)
Further information: User's Manual for Programming of
Machining Cycles
CALL PGM (ISO: %)
Further information: "Calling an external NC program",
Page 252
FN 16: F-PRINT (ISO: D16)
Further information: "FN 16: F-PRINT – Formatted output of
text and Q parameter values", Page 297
FN 26: TABOPEN (ISO: D26)
Further information: "FN 26: TABOPEN – Open a freely
definable table", Page 416
Further information: "Programming notes", Page 250
The FN 18: SYSREAD (ISO: D18) functions have been extended:
FN 18: SYSREAD (D18) ID10: Read program information
NR8: Unit of measure of the calling NC program
NR9: Number of the miscellaneous function
The function is available only within M function macros.
FN 18: SYSREAD (D18) ID210: Read active coordinate
transformations
NR11: Coordinate system for manual movements
FN 18: SYSREAD (D18) ID295: Read data of the machine
kinematics
NR5: Type of use of an axis within the kinematics
FN 18: SYSREAD (D18) ID310: Read geometrical behavior
NR126: State of the miscellaneous function M126
Further information: "System data", Page 550
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
1
41