Pallets | Batch Process Manager (option 154)
Column
Meaning
Status of the workpiece preset
Preset
Status of the inserted tools
T
Status of the NC program
Pgm
Machining status
Sts
The status of the Pallet, Clamping, and Program is shown by means
of icons in the first column.
The icons have the following meanings:
Icon
Meaning
The Pallet, Clamping, or Program is locked
The Pallet or Clamping is not enabled for machin-
ing
This line is currently being executed in Program
run, single block or Program run, full sequence
operating mode and cannot be edited
In this line, the program was interrupted manually
In the Program column, the machining method is indicated by
means of icons.
The icons have the following meanings:
Icon
Meaning
No icon
Workpiece-oriented machining
Tool-oriented machining
Start
End
The status is shown by means of icons in the Preset, T, and Pgm
columns.
The icons have the following meanings:
Icon
Meaning
Test completed
Test failed (e.g., because of expired tool life)
Test not yet completed
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
13
527