HEIDENHAIN TNC 620 User Manual page 577

Tables and overviews | System data
Group Group number
name ID...
Measure the maximum utilization of an axis
621
Read SIK contents
630
Read Functional Safety (FS) information
820
Counter
920
Read and write data of current tool
950
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
System data Index IDX...
number NO....
0 Index of physi-
cal axis
0 Option no.
1 -
2 -
10 -
1 -
1 -
2 -
12 -
1 -
2 -
3 -
4 -
5 -
6 -
Description
Conclude measurement of the dynamic load
and save the result in the specified Q parame-
ter.
You can explicitly determine whether the SIK
option given under IDX has been set or not.
1 = option is enabled
0 = option is not enabled
You can determine whether a Feature Content
Level (for upgrade functions) is set, and which
one.
–1 = No FCL is set
<No.> = FCL that is set
Read serial number of the SIK
-1 = No valid SIK in the system
Define the type of control:
0 = iTNC 530
1 = NCK-based control (TNC7, TNC 640, TNC
620, TNC 320, TNC 128, PNC 610, ...)
FS limitations:
0 = No Functional Safety (FS)
1 = Guard door open (SOM1)
2 = Guard door open (SOM2)
3 = Guard door open (SOM3)
4 = Guard door open (SOM4)
5 = All guard doors closed
Planned workpieces.
In Test Run operating mode the counter
generally generates the value 0.
Already machined workpieces.
In Test Run operating mode the counter
generally generates the value 0.
Workpieces still to be machined.
In Test Run operating mode the counter
generally generates the value 0.
Tool length L
Tool radius R
Tool radius R2
Oversize for tool length DL
Tool radius oversize DR
Tool radius oversize DR2
15
577