Resetting The Dwell Time - HEIDENHAIN TNC 620 User Manual

Special functions | Dwell time FUNCTION FEED

Resetting the dwell time

Reset the dwell time immediately following the machining
with chip breaking.
Example
18 FUNCTION FEED DWELL RESET
Use FUNCTION FEED DWELL RESET to reset the recurring dwell
time.
Proceed as follows for the definition:
Show the soft-key row with special functions
Press the PROGRAM FUNCTIONS soft key
Press the FUNCTION FEED soft key
Press the RESET FEED DWELL soft key
You can also reset the dwell time by entering D-TIME 0.
The control automatically resets the FUNCTION FEED
DWELL function at the end of a program.
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
10
423