HEIDENHAIN TNC 620 User Manual page 552

15
Group Group number
name ID...
System jump addresses
13
Indexed access to Q parameters
15
Machine status
20
552
System data Index IDX...
number NO....
1 -
2 -
3 -
11 Q parameter
number
12 QL parameter
no.
13 QR parameter
no.
1 -
2 -
3 -
4 -
5 -
7 -
8 -
9 -
10 -
11 -
Tables and overviews | System data
Description
Label number or label name (string or QS)
jumped to during M2/M30 instead of ending
the current NC program.
Value = 0: M2/M30 have the normal effect
Label number or label name (string or QS)
jumped to in the event of FN14: ERROR with
the NC CANCEL reaction instead of abort-
ing the NC program with an error message.
The error number programmed in the FN14
command can be read under ID992 NR14.
Value = 0: FN14 has the normal effect.
Label number or label name (string or QS)
jumped to in the event of an internal server
error (SQL, PLC, CFG) or with erroneous file
operations (FUNCTION FILECOPY, FUNCTION
FILEMOVE, or FUNCTION FILEDELETE)
instead of aborting the NC program with an
error message.
Value = 0: Error has the normal effect.
Reads Q(IDX)
Reads QL(IDX)
Reads QR(IDX)
Active tool number
Prepared tool number
Active tool axis
0 = X 6 = U
1 = Y 7 = V
2 = Z 8 = W
Programmed spindle speed
Active spindle condition
-1 = spindle condition not defined
0 = M3 active
1 = M4 active
2 = M5 active after M3
3 = M5 active after M4
Active gear range
Active coolant status
0 = off, 1 = on
Active feed rate
Index of prepared tool
Index of active tool
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022