Data transfer from CAD files | CAD Import (option 42)
Using the CAD viewer
To use the CAD-Viewer without a touchscreen, you have
to use a mouse or touchpad.
The CAD-Viewer runs as a separate application on the third desktop
of the control. This enables you to use the screen switchover key to
switch between the machine operating modes, the programming
modes, and the CAD-Viewer. This is particularly useful if you want to
add contours or machining positions to a Klartext program using the
clipboard.
If you are using a TNC 620 with touch control, you can
replace some keystrokes with gestures.
Further information: "Operating the touchscreen",
Page 535
Opening the CAD file
Press the Programming key
Press the PGM MGT key
The control opens the file manager.
Press the SELECT TYPE soft key
The control displays the selectable file types.
Press the SHOW CAD soft key
Alternative: Press the SHOW ALL soft key
Select the directory in which the CAD file is saved
Select the desired CAD file
Press the ENT key
The control starts the CAD-Viewer and shows
the file contents on the screen. The control
displays the layers in the List View window and
the drawing in the Graphics window.
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
12
499