Operation; Starting The Control Panel - Extron electronics Quantum Ultra User Manual

Operation

The Quantum Ultra processor is a host device with an embedded operating system. The
Quantum Ultra Control Panel is a program that resides on the Quantum Ultra operating
system and enables you to perform various setup and maintenance tasks, such as setting
the processor IP address, resetting the device, or updating the firmware.
This section discusses the functions accessed via the Control Panel:
•
•
•
•
•
•
•
•
•
•

Starting the Control Panel

To access the Quantum Ultra Control Panel:
1.
2.
Starting the Control Panel
Control Panel Buttons
Loading Image Files
Updating the Password
Updating Firmware
Modifying Network Settings
Resetting the Device
Service Mode
Committing Changes to Memory
Shutting Down
Connect a USB keyboard and mouse to the USB system connectors on the rear
panel (see figure 36). You can also connect a USB flash drive to a USB system
connector to load and manage picture files or upload new firmware.
HDMI Out Port
for Monitor
Figure 36. System Ports for Keyboard, Mouse, and Monitor
Connect a monitor to the HDMI Out system connector on the rear panel. A login
window opens with the user name displayed (by default, this name is
Quantum Ultra Videowall Processing System • Operation
SYSTEM
USB Ports for Keyboard,
Mouse, or Flash Drive
).
admin
36