Front Panel Features - Quantum Ultra 305 - Extron electronics Quantum Ultra User Manual

Videowall processing system
Hide thumbs Also See for Quantum Ultra:
Table of Contents

Advertisement

7.
8.
9.
10.
Front Panel Features — Quantum Ultra 305
NOTE: The Quantum Ultra 610 has a door that opens to provide access to
1
Figure 3.
1
Power on the Quantum Ultra and all connected devices.
Download and install VCS on your computer (see
Software (VCS) Program
The default IP address of the Quantum Ultra chassis is:
LAN A: 192.168.254.254.
LAN B: 192.168.1.254
Set a new IP address for the Quantum Ultra using any of the following:
VCS program — The Videowall Configuration Software for the Quantum Ultra
can be downloaded from the Extron website (see
Website
on page 66). Run this program on a computer that is connected to the
same network as the Quantum Ultra to assign an IP address to the processor
(see the VCS Help File for instructions).
NOTE: A gateway IP address is required on the PC running VCS for the
Quantum Ultra to be detected. The gateway IP address does not need to
be valid or in the same subnet for the detection to work.
Internal operating system — The Quantum Ultra is a host device with an
embedded Windows operating system. To interact with the operating system to
change settings, attach peripheral USB devices, such as a keyboard, mouse,
and flash drive, to System USB ports 1, 2, and 3 on the rear panel. Attach an
HDMI monitor to the HDMI Out port beside the System ports to view the settings.
SIS commands — Using a host communication software program such as the
Extron DataViewer on your computer, enter the appropriate SIS command to set
an IP address or enable DHCP (see the
Configure sources, displays, and presets for your videowall system using VCS (see
the VCS Help File).
user-replaceable parts such as fans and power supplies (see
Quantum Ultra 610
on page 70 for more information).
Quantum Ultra 305 Front Panel
Indicator LED — This tri-color LED lights to indicate the following:
Green, blinking — The Quantum Ultra 305 is booting.
Green, steady — The unit is ready for operation.
Amber, steady — The system is in power saving mode.
Red, steady — A fan has failed.
Quantum Ultra Videowall Processing System • Installation and Configuration
Videowall Configuration
on page 66).
Downloading VCS from the
IP Setup
commands on page 62).
Front Panel Door —
QUANTUM ULTRA 305
VIDEOWALL PROCESSOR
10

Advertisement

Table of Contents
loading

Table of Contents