Transform Set
What Do You Want to Do?
If you want to:
Add a new transform set to the router's
configuration.
Edit an existing transform set.
Delete an existing transform set.
Add or Edit Transform Set
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
13-40
Do this:
Click Add, and create the transform set in the Add Transform
Set window.
Select the transform set, and click Edit. Then edit the
transform set in the Edit Transform Set window.
Note
Select the transform set, and click Delete.
Note
Use this window to add or edit a transform set.
To obtain a description of the allowable transform combinations, and descriptions
of the transforms, click
Not all routers support all transform sets (encryption types). Unsupported
•
transform sets will not appear in the screen.
Not all IOS images support all the transform sets that SDM supports.
•
Transform sets unsupported by the IOS image will not appear in the screen.
If hardware encryption is turned on, only those transform sets supported by
•
both hardware encryption and the IOS image will appear in the screen.
Easy VPN servers only support tunnel mode. Transport mode is not supported
•
by Easy VPN servers.
Easy VPN Servers only support transform sets with ESP encryption. Easy
•
VPN servers do not support the AH algorithm.
SDM Default transform sets are read-only and cannot
be edited.
SDM Default transform sets are read-only and cannot
be deleted.
Allowable Transform
Chapter 13
Combinations.
IP Security
OL-4015-08