Select Ethernet Configuration Type; Connection: Vlan - Cisco OL-4015-08 User Manual

Select Ethernet Configuration Type

Dissociate Current QoS Policy checkbox
Associate an existing QoS policy checkbox
Select Ethernet Configuration Type
To indicate that the interface is a LAN interface:
To indicate that the interface is a WAN interface:

Connection: VLAN

Cisco Router and Security Device Manager Version 2.2 User's Guide
4-16
Enabled when a QoS policy is associated with the interface. Check to dissociate
the currently associated policy from the interface.
Click to associate an existing policy, and then select the QoS policy from the list.
This window is displayed when you click on an interface in the Interfaces and
Connections window and SDM cannot determine whether it is configured as a
LAN interface or as a WAN interface. When you configure an interface using
SDM, you designate it as an inside or outside interface, and SDM adds a
descriptive comment to the configuration file based on your designation. If you
have configured an interface using the command-line interface (CLI), the
configuration will not include this descriptive comment, and SDM will not have
this information.
Click LAN, and then click OK. SDM adds the comment line $ETH-LAN$ to the
interface's configuration, and the interface appears in the LAN wizard window,
and appears with the designation Inside in the Interfaces and Connections
window.
Click WAN, and then click OK. SDM adds the comment line $ETH-WAN$ to the
interface's configuration, and the interface appears in the WAN wizard window,
and appears with the designation Outside in the Interfaces and Connections
window.
This screen lets you configure a VLAN interface.
Chapter 4 Edit Interface/Connection
OL-4015-08