Create Connection Wizards - Cisco OL-4015-08 User Manual

Create Connection
Note
Create a New Connection
OL-4015-08

Create Connection Wizards

The Create Connection wizards let you configure LAN and WAN connections for
all SDM-supported interfaces.
This window allows you to create new LAN and WAN connections.
You cannot use SDM to create WAN connections for Cisco 7000 series routers.
Choose a connection type in this area of the window. The types shown are based
on the types of physical interfaces on the router and on which interfaces have not
yet been configured. When you click a radio button for a connection type, a use
case scenario diagram appears to the right illustrating that type of connection. If
all interfaces have been configured, this area is not displayed.
If the router has Asynchronous Transfer Mode (ATM) or Serial interfaces,
multiple connections can be configured from a single interface because Cisco
Router and Security Device Manager (SDM) configures subinterfaces for each
interface of that type.
Cisco Router and Security Device Manager Version 2.2 User's Guide
C H A P T E R
3
3-1