Create an Easy VPN Server
OL-4015-08
Easy VPN Server
The Easy VPN Server feature introduces server support for the Cisco VPN Client
Release 3.x and later software clients and Cisco VPN hardware clients. The
feature allows a remote end user to communicate using IP Security (IPSec) with
any Cisco IOS Virtual Private Network (VPN) gateway. Centrally managed IPSec
policies are "pushed" to the client by the server, minimizing configuration by the
end user.
The following link provides general information on the Cisco Easy VPN solution,
and other links for more specific information:
http://www.cisco.com/en/US/products/sw/secursw/ps5299/index.html
This wizard will guide you through the necessary steps to configure an Easy VPN
Server on this router.
This wizard will guide you in performing the following tasks to successfully
configure an Easy VPN Server on this router.
Choosing the interface on which the client connections will terminate
•
Configuring the group policy lookup method
•
Configuring IKE policies
•
Configuring user authentication
•
•
Configuring group policies on the local database, if needed
Configuring an IPSec transform set
•
Cisco Router and Security Device Manager Version 2.2 User's Guide
C H A P T E R
10
10-105