Dhcp Address Pools - Cisco OL-4015-08 User Manual

Chapter 30 More About....
An ATM interface without any encapsulation
A serial interface
ATM subinterface
An Ethernet subinterface
A dialer interface not associated with an ATM interface
A loopback
A tunnel

DHCP Address Pools

OL-4015-08
The IP addresses that the
that you configure by specifying the starting IP address in the range and the
ending address in the range.
The address range that you specify should be within the following private address
ranges:
10.1.1.1 to 10.255.255.255
•
172.16.1.1 to 172.31.255.255
•
The address range that you specify must also be in the same subnet as the IP
address of the LAN interface. The range can represent a maximum of 254
addresses. The following examples are valid ranges:
10.1.1.1 to 10.1.1.254 (assuming LAN IP address is in 10.1.1.0 subnet)
•
• 172.16.1.1 to 172.16.1.254 (assuming LAN IP address is in 172.16.1.0
subnet)
SDM configures the router to automatically exclude the LAN interface IP address
in the pool.
Cisco Router and Security Device Manager Version 2.2 User's Guide
An ADSL interface
•
A G.SHDSL interface
•
A tunnel or loopback for either of
•
the above
A Frame Relay connection
•
A PPP connection
•
A tunnel interface
•
A loopback interface
•
A tunnel interface
•
A loopback interface
•
DHCP server assigns are drawn from a common pool
DHCP Address Pools
30-5