Available Interface Configurations - Cisco OL-4015-08 User Manual

Available Interface Configurations

Available Interface Configurations
If you have selected:
An Ethernet interface
Any of the following:
Ethernet with a PPPoE connection
•
Dialer Interface associated with an ADSL or
•
G.SHDSL configuration
Serial interface with a PPP or HDLC configuration
•
Serial subinterface with a Frame Relay
•
configuration
Unsupported WAN interface
•
Cisco Router and Security Device Manager Version 2.2 User's Guide
30-4
IP Address/Wildcard Mask
Enter a network address, and then the wildcard mask to specify how much of the
network address must match exactly.
For example, if you entered a network address of 10.25.29.0 and a wildcard mask
of 0.0.0.255, any java applet with a source address containing 10.25.29 would be
filtered. If the wildcard mask were 0.0.255.255, any java applet with a source
address containing 10.25 would be filtered.
Host Name/IP
This field appears if you selected A Host Name or IP Address as Type. If you
enter a host name, ensure that there is a DNS server on the network capable of
resolving the host name to an IP address.
The types of configurations available for each interface type are shown in the
following table.
Chapter 30
You can add a:
PPPoE connection
•
• Tunnel interface
Loopback interface
•
• Tunnel interface
Loopback Interface
•
More About....
OL-4015-08