Chapter 3
Create Connection Wizards
ISDN Wizard Welcome Window
Analog Modem Welcome Window
Aux Backup Welcome Window
OL-4015-08
PPP is the only type of encoding supported over ISDN BRI by SDM.
PPP is the only type of encoding supported over an analog modem connection by
SDM.
The option to configure the AUX port as a dial-up connection will only be shown
for the Cisco 831 and 837 routers.
The Aux dial-backup radio button is disabled if any of the following conditions
occur:
When more than one default route exists
•
When one default route exists and the same is configured with interface other
•
than the primary WAN interface
The Aux dial-backup option will not be shown if any of the following conditions
occur:
When the router is not using a Cisco IOS image that supports the Aux
•
dial-backup feature.
When a primary WAN interface is not configured
•
When the asynchronous interface is already configured
•
When the asynchronous interface is not configurable by SDM due to the
•
presence of unsupported Cisco IOS commands in the existing configuration
Cisco Router and Security Device Manager Version 2.2 User's Guide
ISDN Wizard Welcome Window
3-3