Table of Contents
Advertisement
LAN Wizard: Enable DHCP Server
LAN Wizard: Enable DHCP Server
LAN Wizard: DHCP Address Pool
Note
Starting IP
Ending IP
Cisco Router and Security Device Manager Version 2.2 User's Guide
2-4
This screen lets you enable a
automatically assigns reusable IP addresses to the devices on the LAN. When a
device becomes active on the network, the DHCP server grants it an
When the device leaves the network, the IP address is returned to the pool for use
by another device.
To enable a DHCP server on the router:
Click Yes.
This screen lets you configure the DHCP IP address pool. The IP addresses that
the
DHCP
server assigns are drawn from a common pool that you configure by
specifying the starting IP address in the range, and the ending address in the
range.
For more information, see
If there are discontinuous address pools configured on the router, then the
Starting IP and Ending IP address fields will be read-only.
Enter the beginning of the range of IP addresses for the DHCP server to use in
assigning addresses to devices on the LAN. This is the lowest-numbered IP
address in the range.
Enter the highest-numbered
DHCP
server on your router. A DHCP server
DHCP Address
Pools.
IP address
in the range of IP addresses.
Chapter 2
LAN Wizard
IP
address.
OL-4015-08
Advertisement
Table of Contents
Troubleshooting
