Address Pools - Cisco OL-4015-08 User Manual

Chapter 18 Network Address Translation
Edit Route Map Entry
Name
Seq No.
Action
Access Lists
To edit an access list in a route map entry:

Address Pools

Pool Name
OL-4015-08
Use this window to edit the access list specified in a route map entry.
A read-only field containing the name of the route map entry.
A read-only field containing the sequence number for the route map. When SDM
creates a route map, it automatically assigns it a sequence number.
Either permit or deny. Route maps created by SDM are configured with the
permit keyword. If this field contains the value deny, the route map was created
using the CLI.
This area shows the access lists associated with this entry. The route map uses
these access lists to determine which traffic to protect from NAT translation.
Select the access list, and click Edit. Then, edit the access list in the windows
displayed.
The Address Pools window shows the configured address pools that can be used
in dynamic NAT translation.
This field contains the name of the address pool. Use this name to refer to the pool
when configuring a dynamic NAT rule.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Network Address Translation Rules
18-15