Welcome To The Scep Wizard; Certificate Authority (Ca) Information - Cisco OL-4015-08 User Manual

Chapter 28 Public Key Infrastructure
Note
SDP
Launch the selected task button

Welcome to the SCEP Wizard

Certificate Authority (CA) Information

OL-4015-08
SDM supports only base-64-encoded PKCS#10-type cut and paste enrollment.
SDM does not support importing PEM and PKCS#12 type certificate enrollments.
Click this button if you want to use Secure Device Provisioning (SDP) to enroll
your router with a CA server. SDM transfers you to the SDP web-browser based
application to complete the enrollment process. When the process is complete,
SDM displays the Certificates window where you can view the certificates that
you have obtained from the CA.
To learn what you need to do to prepare for SDP enrollment, see
Troubleshooting Tips.
For more information on SDP, click the following link:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_gui
de09186a008028afbd.html#wp1043332
Click to begin the wizard for the type of enrollment that you selected. If SDM has
detected a required task that must be performed before enrollment can begin, this
button is disabled. Once the task is completed, the button is enabled.
This screen indicates that you are using the SCEP wizard. If you do not want to
use the Simple Certificate Enrollment Process, click Cancel to leave this wizard.
After the wizard completes and the commands are delivered to the router, SDM
attempts to contact the CA server. If the CA server is contacted, SDM displays a
message window with the server's digital certificate.
Provide information to identify the CA server in this window. Also specify a
challenge password that will be sent along with the request.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Certificate Wizards
SDP
28-37