Add Or Edit Eigrp Route - Cisco OL-4015-08 User Manual

Chapter 17 Routing

Add or Edit EIGRP Route

Autonomous System Number
IP Network List
Available Interface List
Make Interface Passive
Caution
Add
Delete
OL-4015-08
Use this window to add or delete an Extended IGRP (EIGRP) route.
The autonomous system number is used to identify the router's EIGRP routing
process to other routers.
Enter the networks that you want to create routes to. Click Add to add a network.
Click Delete to delete a network from the list.
The available interfaces are shown in this list.
Check the box next to the interface if you do not want it to send updates to its
neighbor. The interface will neither send nor receive routing updates.
When you make an interface passive, EIGRP suppresses the exchange of hello
packets between routers, resulting in the loss of their neighbor relationship. This
not only stops routing updates from being advertised, but also suppresses
incoming routing updates.
Click Add to add a destination network IP address to the Network list.
Select an IP address, and click Delete to remove an IP address from the Network
list.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Add or Edit EIGRP Route
17-7