Backup Configuration: Primary Interface & Next Hop Ip Addresses; Backup Configuration: Hostname Or Ip Address To Be Tracked - Cisco OL-4015-08 User Manual

Backup Configuration
Backup Configuration: Primary Interface & Next Hop IP
Addresses
Primary Interface
Primary Next Hop IP Address
Backup Next Hop IP Address

Backup Configuration: Hostname or IP Address to be Tracked

IP Address to be Tracked
Cisco Router and Security Device Manager Version 2.2 User's Guide
3-12
In order for the ISDN BRI or analog modem connection to act as a backup
connection, it must be associated with another interface on the router that will act
as the primary connection. The ISDN BRI or analog modem connection will be
made only if the connection on the primary interface goes down.
Select the router interface that will maintain the primary connection.
This field is optional. Enter the IP address to which the primary interface will
connect when it is active, known as the next hop IP address.
This field is optional. Enter the IP address to which the backup interface will
connect when it is active, known as the next hop IP address.
This screen lets you identify a specific host to which connectivity must be
maintained. The router will track connectivity to that host, and if the router
discovers that connectivity has been lost by the primary interface, a backup
connection will be initiated over the ISDN BRI or analog modem interface.
Enter the IP address or host name of the destination host to which connectivity
will be tracked. Please specify an infrequently-contacted destination as the site to
be tracked.
Chapter 3 Create Connection Wizards
OL-4015-08