Cisco OL-4015-08 User Manual page 68

Connectivity testing and troubleshooting
IP Address/Hostname
Summary
Details
Cisco Router and Security Device Manager Version 2.2 User's Guide
3-24
the PPPoE tunnel status
•
the PPP authentication status
•
After performing these checks, SDM reports the reason that the ping failed.
If the ping fails on an Ethernet with PPPoE encapsulation connection, SDM
checks:
the PPPoE tunnel status
•
the PPP authentication status
•
After performing these checks, SDM reports the reason that the ping failed.
If the ping fails on an xDSL connection with AAL5SNAP or AAL5MUX
encapsulation, SDM checks the ATM PVC status and reports the reason the ping
failed.
Specify the server name to ping to test WAN interface.
Automatically determined by SDM
SDM pings its default host to test WAN interface. SDM detects the router's
statically configured DNS servers, and dynamically imported DNS servers. SDM
pings these servers, and if successful pings exit through the interface under test,
SDM reports success. If no pings succeeded, or successful pings were not found
to exit the interface under test, SDM reports failure.
User Specified
Specify the IP address of hostname of your choice for testing WAN interface.
Click this button if you want to view the summarized troubleshooting
information.
Click this button if you want to view the detailed troubleshooting information.
Chapter 3 Create Connection Wizards
OL-4015-08