Interface Association; Qos Status - Cisco OL-4015-08 User Manual

QoS Status

Interface Association

Interface list
Details Button
Yes Button
No Button
QoS Status
Cisco Router and Security Device Manager Version 2.2 User's Guide
21-18
This window provides you the opportunity to associate a cloned policy to an
interface.
The interface list displays the interfaces with which you can associate the
policy. If you want to associate the cloned policy to an interface, select the
interface from the list and click Yes.
Click to view details about the selected interface such as IP address/subnet mask,
ACLs applied to the interface, and IPSec policies associated with the interface.
Click if you want to associate the QoS policy to the selected interface.
Click if you do not want to associate the QoS policy to the selected interface.
The QoS Status window allows you to monitor the performance of the traffic on
QoS configured interfaces. This window also allows to monitor bandwidth
utilization and bytes-sent for interfaces with no QoS configuration. Monitoring
inbound traffic on QoS interfaces shows the statistics only at a protocol level.
Protocol-level statistics for non-QoS interfaces are collected for traffic in both
directions.
This window allows you to monitor the following statistics:
Bandwidth utilization for SDM defined traffic types
•
Bandwidth utilization per class under each traffic type
–
Bandwidth utilization for protocols under each class
–
Chapter 21 Quality of Service
QoS
OL-4015-08