Cisco OL-4015-08 User Manual page 150

How Do I...
From the left frame, select Additional Tasks.
Step 1
In the Rules tree, select ACL Editor and then Access Rules.
Step 2
Click Add.
Step 3
The Add a Rule dialog box appears.
Step 4 In the Name/Number field, enter a unique name or number for this rule.
In the Description field, enter a description of the rule, such as "VPN
Step 5
Concentrator Traffic."
Click Add.
Step 6
The Add an Extended Rule Entry dialog box appears.
In the Source Host/Network group, from the Type field, select A Network.
Step 7
In the IP Address and Wildcard Mask fields, enter the IP address and network
Step 8
mask of the VPN source peer.
In the Destination Host/Network group, from the Type field, select A Network.
Step 9
In the IP Address and Wildcard Mask fields, enter the IP address and network
Step 10
mask of the VPN destination peer.
In the Protocol and Service group, select TCP.
Step 11
In the Source port fields, select =, and enter the port number 1023.
Step 12
In the Destination port fields, select =, and enter the port number 1723.
Step 13
Click OK.
Step 14
The new rule entry appears in the Rule Entry list.
Repeat Step 7 through Step 15, creating rule entries for the following protocols
Step 15
and, where required, port numbers:
•
•
•
•
Click OK.
Step 16
Cisco Router and Security Device Manager Version 2.2 User's Guide
5-18
Protocol IP, IP protocol GRE
Protocol UDP, Source Port 500, Destination Port 500
Protocol IP, IP Protocol ESP
Protocol UDP, Source Port 10000, Destination Port 10000
Chapter 5 Create Firewall
OL-4015-08