How Do I Configure A Dmvpn Manually - Cisco OL-4015-08 User Manual

Chapter 11 DMVPN

How Do I Configure a DMVPN Manually?

To configure an IPSec Profile:
Step 1
Step 2
Step 3
Step 4
To configure a DMVPN connection:
Step 1
Step 2
Step 3
Step 4
OL-4015-08
You can configure your router as a DMVPN hub or spoke using the VPN
Components windows and the Edit Dynamic Multipoint VPN (DMVPN) window.
In order to do so you need to complete the following tasks:
Configure an IPSec profile. You cannot configure a DMVPN connection until
•
you have configured at least one IPSec profile.
• Configure the DMVPN connection.
Specify the networks you want to advertise to the DMVPN cloud.
•
Procedures for these tasks are given below:
You need to configure an IPSec policy, and then configure a DMVPN tunnel.
Click VPN in the left panel, and then click VPN Components.
Click the IPSec Profiles branch, and then click Add in the IPSec Profiles window.
Name the profile, and select the transform sets it is to contain in the Add an IPSec
profile window. You can enter a short description if you want to.
Click OK.
In the VPN tree, click the Dynamic Multipoint VPN branch.
Click Edit Dynamic Multipoint VPN (DMVPN).
Click Add.
In the DMVPN Tunnel Configuration window, complete the General, NHRP, and
Routing tabs to create a DMVPN tunnel.Consult the online help for more
information about a particular field.
Cisco Router and Security Device Manager Version 2.2 User's Guide
How Do I Configure a DMVPN Manually?
11-19