Add Or Edit A Radius Server; Edit Global Settings - Cisco OL-4015-08 User Manual

Chapter 26 Authentication, Authorization, and Accounting

Add or Edit a RADIUS Server

Server IP or Host
Authorization Port
Accounting Port
Timout in seconds
Configure Key

Edit Global Settings

OL-4015-08
Add or edit information for a RADIUS server in this window.
Enter the IP address or the host name of the server. If the router has not been
configured to use a Domain Name Service (DNS) server, enter an IP address.
Specify the server port to use for authorization requests. The default is 1645.
Specify the server port to use for accounting requests. The default is 1646.
Optional. Enter the number of seconds that the router should attempt to contact
this server before going on to the next server in the group list. If you do not enter
a value, the router will use the value configured in the AAA Servers Global
Settings window.
Optional. Enter the key to use to encrypt traffic between the router and this server.
If you do not enter a value, the router will use the value configured in the AAA
Servers Global Settings window.
New Key/Confirm Key
Enter the key and reenter it for confirmation.
You can specify communication settings that will apply to all communications
between the router and AAA servers in this window. Any communications
settings made for a specific router will override settings made in this window.
Cisco Router and Security Device Manager Version 2.2 User's Guide
AAA Servers and Groups
26-27