Connection: (Aux Backup) - Cisco OL-4015-08 User Manual

Chapter 4 Edit Interface/Connection

Connection: (AUX Backup)

Encapsulation
Remote Phone Number
Options
OL-4015-08
Complete these fields if you are configuring an asynchronous dial-up connection
using the console port to double as an AUX port on a Cisco 831 or 837. Once you
have entered the informatoin on this screen, click Backup Details and enter
dial-backup information, which is required for this type of connection. Note that
because SDM supports only PPP encapsulation over an analog modem
connection, the encapsulation shown is not editable.
The option to configure the AUX port as a dial-up connection will only be shown
for the Cisco 831 and 837 routers. This option will not be available for those
routers when any of the following conditions occur:
When the router is not using a Zutswang Cisco IOS image
•
When a primary WAN interface is not configured
•
When the asynchronous interface is already configured
•
When the asynchronous interface is not configurable by SDM due to the
•
presence of unsupported Cisco IOS commands in the existing configuration
PPP selected.
Enter the phone number of the destination of the analog modem connection.
Click this button if you need to associate ACLs with a dialer list to identify
interesting traffic or enter timer settings.
Identifying interesting traffic will cause the router to dial out and create an active
connection only when the router detects interesting traffic.
Timer settings will cause the router to automatically disconnect a call after the
line is idle for the specified amount of time.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Connection: (AUX Backup)
4-49