Basic Nat Wizard: Welcome; Basic Nat Wizard: Connection - Cisco OL-4015-08 User Manual

Network Address Translation Wizards

Basic NAT Wizard: Welcome

Basic NAT Wizard: Connection

Choose an Interface
Choose Networks
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
18-2
If your network has email servers, web servers, or other types of servers and
you want them to accept connections from the Internet, choose Advanced
NAT and click the Launch button.
If you do not want your servers to accept connections from the Internet,
Note
you can use the Basic NAT wizard.
The Basic NAT welcome window shows how the wizard will guide you through
configuring NAT for connecting one or more LANs, but no servers, to the Internet.
From the drop down menu, choose the interface that connects to the Internet. This
is the router's WAN interface.
The list of available networks shows the networks connected to your router.
Choose which networks will share the WAN interface in the NAT configuration
you set up. To choose a network, enable its checkbox in the list of available
networks.
Do not choose a network connected to the WAN interface set up in this NAT
configuration. Remove that network from the NAT configuration by clearing its
checkbox.
The list shows the following information for each network:
The IP address range allocated to the network
•
The network's LAN interface
•
Any comments entered about the network
•
Chapter 18 Network Address Translation
OL-4015-08