SDM White Papers
Ping the Hub Before You Start Spoke Configuration
SDM White Papers
Cisco Router and Security Device Manager Version 2.2 User's Guide
30-34
Before configuring a spoke router, you should test connectivity to the hub by
issuing the ping command. If the ping does not succeed, you must configure a
route to the hub.
A number of white papers are available that describe how SDM can be used.
These white papers are available at the following link.
http://www.cisco.com/univercd/cc/td/doc/product/software/sdm/appnote/index.h
tm
Chapter 30
More About....
OL-4015-08