Add Or Edit Address Pool - Cisco OL-4015-08 User Manual

Network Address Translation Rules
Address
What do you want to do?
If you want to:
Add an address pool to the router's
configuration.
Edit an existing address pool.
Delete an address pool.
Note

Add or Edit Address Pool

Pool Name
Cisco Router and Security Device Manager Version 2.2 User's Guide
18-16
This field contains the IP address range in the pool. Devices whose IP addresses
match the access rule specified in the Add Address Translation rule window will
be given private IP addresses from this pool.
Do this:
Click Add, and configure the pool in the Add Address Pool
window.
If you want to use an existing pool as a template for the new
pool, select the existing pool, check Clone selected entry on
Add, and click Add.
Select the pool entry, click Edit, and edit the pool
configuration in the Edit Address Pool window.
Select the pool entry, click Delete, and confirm deletion in
the Warning box displayed.
If SDM detects a previously-configured NAT address pool that uses the "type"
keyword, that address pool will be read-only and cannot be edited.
Use this window to specify an address pool for dynamic address translation, an
address for Port Address Translation (PAT), or a TCP load balancing rotary pool.
Enter the name of the address pool.
Chapter 18 Network Address Translation
OL-4015-08