File Selection - Cisco OL-4015-08 User Manual

Chapter 19 Intrusion Prevention System
Note

File Selection

Filename
Size
Time Modified
OL-4015-08
Before you use the IPS Signature Import wizard, you must have saved the SDF
that you intend to use to a directory on your PC.
Click the Edit Signatures tab to manage the signatures that IPS uses.
This window allows you to load a file from your router. Only DOSFS file systems
can be viewed in this window.
The left side of window displays an expandible tree representing the directory
system on your Cisco router flash memory and on USB flash devices connected
to that router.
The right side of the window displays a list of the names of the files and
directories found in the directory that is chosen in the left side of the window. It
also shows the size of each file in bytes, and the date and time each file and
directory was last modified.
You can choose a file to load in the list on the right side of the window. Below the
list of files is a Filename field containing the full path of the currently chosen file.
Files with the no-write icon next to their names cannot be chosen.
Click Filename to order the files and directories alphabetically based on name.
Clicking Filename again will reverse the order.
Click Size to order the files and directories by size. Directories always have a size
of zero bytes, even if they are not empty. Clicking Size again will reverse the
order.
Click Time Modified to order the files and directories based on modification date
and time. Clicking Time Modified again will reverse the order.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Import Signatures
19-39