Connection: Serial Interface, Frame Relay Encapsulation - Cisco OL-4015-08 User Manual

Connection: Serial Interface, Frame Relay Encapsulation

Connection: Serial Interface, Frame Relay
Encapsulation
Encapsulation
IP Address
Cisco Router and Security Device Manager Version 2.2 User's Guide
4-36
Enter the name in the Dynamic DNS Method field exactly as it appears in
the list in Configure > Additional Tasks > Dynamic DNS Methods.
Choose an existing dynamic DNS method from a list.
•
Click the drop-down menu and choose to use an existing method. A window
with a list of existing dynamic DNS methods will open. This menu choice is
available only if there are existing dynamic DNS methods.
Create a new dynamic DNS method.
•
Click the drop-down menu and choose to create a new dynamic DNS method.
To clear an associated dynamic DNS method from the interface, choose None
from the drop-down menu.
Complete these fields if you are configuring a serial subinterface for
encapsulation. If you are editing a connection or creating a connection in the Edit
Interfaces and Connections window, the encapsulation is shown, but not editable.
If you need to change the encapsulation type, delete the connection, and recreate
it, using the encapsulation type you need.
Frame Relay selected.
Select either Static IP address or IP unnumbered.
IP Address
If you selected Static IP address, enter the
this value from your network administrator or service provider. For more
information, refer to IP Addresses and Subnet
Chapter 4 Edit Interface/Connection
IP address for this interface. Obtain
Masks.
Frame Relay
OL-4015-08