Advanced Nat Wizard: Connection; Add Ip Address; Advanced Nat Wizard: Networks - Cisco OL-4015-08 User Manual

Network Address Translation Wizards

Advanced NAT Wizard: Connection

Choose an Interface
Additional Public IP Addresses

Add IP Address

Advanced NAT Wizard: Networks

Choose Networks
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
18-4
From the drop down menu, choose the interface that connects to the Internet. This
is the router's WAN interface.
Click Add to enter public IP addresses that you own. You will be able to assign
these IP address to servers on your network that you want to make available to the
Internet.
To delete an IP address from the list, select the IP address and click Delete.
Enter a public IP address that you own. You will be able to assign this IP address
to a server on your network that you want to make available to the Internet.
The list of available networks shows the networks connected to your router.
Choose which networks will share the WAN interface in the NAT configuration
you set up. To choose a network, enable its checkbox in the list of available
networks.
Do not choose a network connected to the WAN interface set up in this NAT
configuration. Remove that network from the NAT configuration by clearing its
checkbox.
The list shows the following information for each network:
The IP address range allocated to the network
•
The network's LAN interface
•
Chapter 18 Network Address Translation
OL-4015-08