Routing Information - Cisco OL-4015-08 User Manual

Create Site to Site VPN

Routing Information

EIGRP
OSPF
RIP
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
8-52
This window enables you to configure routing for the tunneled traffic. Information
that you add in this window appears in the Routing window. Changes that you
make in the Routing window may affect routing of VPN traffic. Configuring
routing enables you to specify the networks that will participate in the
GRE-over-IPSec VPN. Additionally, if you configure a backup GRE-over-IPSec
tunnel, the keepalive packets sent by routing protocols allow the router to
determine whether the primary tunnel has failed.
Select a dynamic routing protocol if this router is being used in a large
deployment with a large number of networks in the
static routing if a small number of networks will participate in the VPN.
Check this box to use the Enhanced Interior Gateway Routing Protocol (EIGRP)
protocol to route traffic. Then click Next to specify which networks will
participate in the GRE-over-IPSec VPN in the Routing Information window.
Check this box to use the Open Shortest Path First protocol (OSPF) to route
traffic. Then click Next to specify which networks will participate in the
GRE-over-IPSec VPN in the Routing Information window.
Check this box to use the Routing Information Protocol(RIP) to route traffic. Then
click Next to specify which networks will participate in the GRE-over-IPSec VPN
in the Routing Information window.
This option is not available when you configure a backup GRE-over-IPSec tunnel.
Chapter 8 Site-to-Site VPN
VPN
GRE over IPSec VPN. Select
OL-4015-08