How Do I View The Ios Commands I Am Sending To The Router; How Do I Configure An Unsupported Wan Interface; How Do I Enable Or Disable An Interface; How Do I View Activity On My Wan Interface - Cisco OL-4015-08 User Manual

WAN Wizard Interface Welcome Window

What Do You Want to Do?
If you want to:
Learn how to perform configurations
that this wizard does not help you with.
Configure an interface that SDM does
not support.
WAN Wizard Interface Welcome Window
Cisco Router and Security Device Manager Version 2.2 User's Guide
3-2
The Other (Unsupported by SDM) radio button appears if an unsupported logical
or physical interface exists, or if a supported interface exists that has been given
an unsupported configuration. When you click this radio button, Create New
Connection is disabled, and a reason for the Other radio button appearing is given
in the Information box.
If the router has radio interfaces but you do not see a Wireless radio button, you
are not logged on as an SDM Administrator. If you need to use the Wireless
Application, go to the SDM Tools menu, and select Wireless Application.
Do this:
See one of the following procedures:
•
•
•
•
•
•
•
•
Refer to the software configuration guide for the router to use
the CLI to configure the interface.
This window lists the types of connections you can configure for this interface
using SDM. If you need to configure another type of connection for this interface,
you can do so using the CLI.
How Do I View the IOS Commands I Am Sending to the
Router?

How Do I Configure an Unsupported WAN Interface?

How Do I Enable or Disable an Interface?

How Do I View Activity on My WAN Interface?

How Do I Configure NAT on a WAN Interface?

How Do I Configure a Static Route?

How Do I Configure a Dynamic Routing Protocol?

How Do I Configure Dial-on-Demand Routing for my
ISDN or Asynchronous Interface?
Chapter 3 Create Connection Wizards
OL-4015-08