Add Or Edit Dhcp Pool - Cisco OL-4015-08 User Manual

DHCP Configuration
Add
Edit
Delete
DHCP Pool Status

Add or Edit DHCP Pool

DHCP Pool Name
DHCP Pool Network
Cisco Router and Security Device Manager Version 2.2 User's Guide
23-22
Select this option to create a new DHCP Pool. User need to specify DHCP Pool
name, DHCP Pool network, DHCP pool ip address range and Lease time. Also
DNS servers, WINS server, domain name and default router can be configured in
the DHCP pool, but these were option fields.
Select this option to edit an existing DHCP Pool.
Select this option to delete a DHCP pool.
Clicking this button shows the IP Addresses leased by the selected pool. If a
DHCP pool contains any parameters other than pool network, IP address range,
lease time DNS servers, WINS servers, domain name and default router, SDM
shows this pool as read-only. Also, if a pool contains a discontinuous range of IP
addresses it will be shown as read-only.
Add or Edit a DHCP pool in this window. You cannot edit SDM-default pools.
Provide a name for the DHCP pool in this field.
Enter the network from which the IP addresses in the pool will be taken. For
example, 192.168.233.0. This cannot be the IP address of an individual host.
Chapter 23 Router Properties
OL-4015-08