Advanced Nat Wizard: Welcome; Summary - Cisco OL-4015-08 User Manual

Chapter 18 Network Address Translation
Note

Summary

Advanced NAT Wizard: Welcome

OL-4015-08
To remove a network from the NAT configuration, clear its checkbox.
If SDM detects a conflict between the NAT configuration and an existing VPN
configuration for the WAN interface, it will inform you with a dialog box after
you click Next.
This window shows you the NAT configuration you created, and allows you to
save the configuration. The summary will appear similar to the following:
Interface that is connected to the Internet or to your Internet
service provider:
FastEthernet0/0
IP address ranges that share the Internet connection:
108.1.1.0 to 108.1.1.255
87.1.1.0 to 87.1.1.255
12.1.1.0 to 12.1.1.255
10.20.20.0 to 10.20.20.255
If you used the Advanced NAT wizard, you may also see additional information
similar to the following:
NAT rules for servers:
Translate 10.10.10.19 TCP port 6080 to IP address of interface
FastEthernet0/0 TCP port 80
Translate 10.10.10.20 TCP port 25 to 194.23.8.1 TCP port 25
The Advanced NAT welcome window shows how the wizard will guide you
through configuring NAT for connecting your LANs and servers to the Internet.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Network Address Translation Wizards
18-3