Cisco OL-4015-08 User Manual page 609

Chapter 32 Viewing Router Information
Test Tunnel.. Button
IPSec Tunnels
OL-4015-08
IPSec Tunnels
•
DMVPN Tunnels
•
Easy VPN Servers
•
IKE SAs
•
Click to test a selected VPN tunnel.The results of the test will be shown in another
window.
This group displays statistics about each IPSec VPN that is configured on the
router. Each row in the table represents one IPSec VPN. The columns in the table
and the information they display are as follows:
Interface column
•
The WAN interface on the router on which the IPSec tunnel is active.
Local IP column
•
The IP address of the local IPSec interface.
Remote IP column
•
The IP address of the remote IPSec interface.
Peer column
•
The IP address of the remote peer.
Tunnel Status
•
The current status of the IPSec tunnel. Possible values are:
Up—The tunnel
–
Down—The tunnel is inactive due to an error or hardware failure.
–
• Encapsulation Packets column
The number of packets encapsulated over the IPSec VPN connection.
Decapsulation Packets column
•
The number of packets decapsulated over the IPSec VPN connection.
Send Error Packets column
•
Cisco Router and Security Device Manager Version 2.2 User's Guide
is active
VPN Status
32-9