Add Or Edit A Signature Location - Cisco OL-4015-08 User Manual

Chapter 19 Intrusion Prevention System

Add or Edit a Signature Location

Specify SDF on this router
Specify SDF using URL
OL-4015-08
SigVersion—Signature version.
•
ThrottleInterval —Number of seconds defining an Alarm Throttle interval.
•
This is used with the AlarmThrottle parameter to tune special alarm limiters.
WantFrag—True if a fragment is desired. False if a fragment is not desired.
•
Any for either.
Specify the location that IOS IPS should load an
SDF locations, open this dialog again and enter the information for another SDF.
Specify where the SDF is located on the router by choosing which part of router
memory the file is in, for example disk0 or flash, and either choose or enter the
filename in the File Name field.
If the SDF is located on a remote system, you can specify the URL at which it
resides.
Protocol
Select the protocol the router should use to obtain the SDF, such as http, or https.
URL
Enter the Universal Resource Locator (URL) in the following form:
https://path-to-signature-file
The following URL is provided as an example of the format. It is not a valid URL
to a signature file:
https://172.16.122.204/mysigs/vsensor.sdf
Cisco Router and Security Device Manager Version 2.2 User's Guide
Import Signatures
SDF from. To specify multiple
19-49