Translation Timeout Settings; Edit Route Map - Cisco OL-4015-08 User Manual

Chapter 18 Network Address Translation
If you want to:
Make translation timeout settings.
Add a NAT rule.
Edit a NAT rule.
Delete a NAT rule.
View and/or edit route maps.
If virtual private network (VPN)
connections are configured on the
router, the local IP addresses in the
VPN must be protected from NAT
translations. When both VPN and NAT
are configured, Cisco Router and
Security Device Manager (SDM)
creates route maps to protect IP
addresses in a VPN from being
translated. Additionally, route maps
may be configured using the
command-line interface (CLI). You can
view configured route maps and edit
the access rule they use.
Find out how to perform related
configuration tasks.
OL-4015-08
Do this:
Click Translation Timeouts, and make settings in the
Translation Timeouts window.
Click Add, and create the NAT rule in the Add Address
Translation Rule window.
If you want to use an existing NAT rule as a template for the
new rule, select the rule, click Clone selected entry on Add,
and then click Add.
Select the NAT rule that you want to edit, click Edit, and edit
the rule in the Edit Address Translation Rule window.
Select the NAT rule that you want to delete, and click Delete.
You must confirm deletion of the rule in the Warning box
displayed.
Click View Route MAP.
Refer to one of the following procedures:
How Do I Configure NAT Passthrough for a VPN?
•
How Do I Configure NAT on an Unsupported Interface?
•
How Do I Configure NAT Passthrough for a Firewall?
•
Cisco Router and Security Device Manager Version 2.2 User's Guide
Network Address Translation Rules
18-11