Write To Startup Config; Reset To Factory Defaults; File Management - Cisco OL-4015-08 User Manual

Write to Startup Config

Cancel
Save to File
Write to Startup Config

Reset to Factory Defaults

File Management

Cisco Router and Security Device Manager Version 2.2 User's Guide
33-2
Click this button to discard the configuration change and close the SDM Deliver
to Router dialog box.
Click this button to save the configuration changes shown in the window to a text
file.
Writes the router's running configuration file to the router startup configuration.
If SDM is being used to configure a Cisco 7000 router, this menu item will be
disabled if there are boot network or boot host commands present with
service config commands in the running configuration.
See Resetting to Factory
This window allows you to view and manage the file system on your Cisco router
flash memory and on USB flash devices connected to that router. Only DOSFS
file systems can be viewed and managed in this window.
The left side of window displays an expandible tree representing the directory
system on your Cisco router flash memory and on USB flash devices connected
to that router.
The right side of the window displays a list of the names of the files and
directories found in the directory that is chosen in the left side of the window. It
also shows the size of each file in bytes, and the date and time each file and
directory was last modified.
Defaults.
Chapter 33 File Menu Commands
OL-4015-08