Set Time - Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual

Appendix C Command Reference
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the set ip command to reset the system IP address in response to subsequent prompts. For more
information, see
Example
The following command begins the system IP address configuration.
set ip
set password
To set the ACS SE administrator's password, use the set password command. Subsequent prompts take
you through the process.
set password
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the set password command to begin resetting the administrator's password. Subsequent prompts
take you through the process. For more information, see
Password, page
Example
The following command initiates the password setting procedure:
set password

set time

To set the ACS SE time zone, NTP server, date, or time, use the set time command:
set time
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the set time command to begin the setting of the timezone, current date, and current time.
Subsequent prompts take you through the process. For more information, see
and Date Manually, page
OL-9969-03
Reconfiguring the Solution Engine IP Address, page
4-15.
4-20.
Resetting the Solution Engine Administrator
Installation Guide for Cisco Secure ACS Solution Engine 4.1
Commands
4-18.
Setting the System Time
C-13