Advanced Nat Wizard: Vpn Conflict; Details; Network Address Translation Rules; Designate Nat Interfaces - Cisco OL-4015-08 User Manual

Network Address Translation Rules

Advanced NAT Wizard: VPN Conflict

View Details

Details

Network Address Translation Rules

Designate NAT Interfaces

Cisco Router and Security Device Manager Version 2.2 User's Guide
18-8
If this Advanced NAT wizard window appears, SDM has detected a conflict
between the NAT configuration and an existing VPN configuration for the WAN
interface.
Choose to modify the NAT configuration to remove the conflict, or choose to not
modify the NAT configuration. If you choose to not modify the NAT
configuration, the conflict may cause your VPN connection to stop working.
Click the View Details button to see the proposed modifications to the NAT
configuration to resolve the conflict.
This window lists the changes SDM will make to the NAT configuration to resolve
conflicts between NAT and VPN configured on the same interface.
The Network Address Translation Rules window lets you view
address pools, and set translation timeouts. From this window you can also
designate interfaces as inside or outside interfaces.
For more information on NAT, follow the link
Click to designate interfaces as inside or outside. NAT uses the Inside/Outside
designations as reference points when interpreting translation rules. Inside
interfaces are those interfaces connected to the private networks that the router is
connected to. Outside interfaces connect to the
designated Inside and Outside interfaces are listed above the NAT rule list.
Chapter 18 Network Address Translation
NAT
More About NAT.
WAN or to the Internet. The
rules, view
OL-4015-08