Eapoudp Timeouts - Cisco OL-4015-08 User Manual

Chapter 22 Network Admission Control
Add, Edit, and Delete Buttons

EAPoUDP Timeouts

Interface List
Hold Period Timeout Field
Retransmit Timeout Field
OL-4015-08
Click the Add button to create a new exception policy. Use the Edit button to
modify existing exception policies, and the Delete button to remove exception
policies. The Edit and Delete buttons are disabled when there are no exception
policies in the list.
Configure the timeout values the router is to use for
with network hosts. The default, minimum, and maximum values for all settings
are shown in the following table.
Value
Hold Period Timeout
Retransmission Timeout
Revalidation Timeout
Status Query Timeout
Select the interface to which the EAPoUDP timeout settings are to apply.
Enter the number of seconds that the router is to ignore packets from clients that
have just failed authentication.
Enter the number of seconds the router is to wait before retransmitting EAPoUDP
messages to clients.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Default Minimum
180 seconds 60 seconds
3 seconds 1 second
36000 seconds 300 seconds
300 seconds 30 seconds
Edit NAC Tab
EAPoUDP communication
Maximum
86400 seconds
60 seconds
86400 seconds
1800 seconds
22-33