Configure A Nac Policy - Cisco OL-4015-08 User Manual

Edit NAC Tab
Revalidation Timeout Field
Status Query Timeout Field
Reset to Defaults Button
Configure these timeout values globally checkbox

Configure a NAC Policy

Name Field
Select an Interface List
Admission Rule Field
Cisco Router and Security Device Manager Version 2.2 User's Guide
22-34
The router periodically queries the
client's adherence to security policy. Enter the number of seconds that the router
should wait between queries.
Enter the number of seconds the router should wait between queries to the posture
agent on the host.
Click to reset all EAPoUDP timeouts to their default values.
Click this checkbox to have these values apply to all interfaces.
A NAC policy enables the posture validation process on a router interface, and can
be used to control the admission control process by specifying the types of traffic
that are to be exempt from posture validation.
Enter a name for the policy.
Select the interface to which you want to apply the NAC policy. Select an interface
that connects network clients to the router.
Use an access rule to exempt specific traffic from triggering the admission control
process. Enter the name of the access rule that you want to use for the admission
rule. You can also click the button to the right of this field and browse for the
access rule, or create a new access rule.
Chapter 22
posture agent on the client to determine the
Network Admission Control
OL-4015-08