Enable Or Edit Ips On An Interface - Cisco OL-4015-08 User Manual

Chapter 19 Intrusion Prevention System

Enable or Edit IPS on an Interface

Both/Inbound/Outbound
Inbound Filter
OL-4015-08
Permit source traffic.
Deny source traffic.
Source/Destination—A network or host address, or any host or network.
Service—Type of service filtered. IP, TCP, UDP, IGMP, and ICMP services can
be filtered.
Log—Whether or not denied traffic is logged.
Options—Options configured using the CLI.
Description—Any description provided.
Use this window to select the interfaces on which you want to enable intrusion
detection, and to select the
be examined.
Use these buttons to specify whether you are going to enable IPS on both inbound
and outbound traffic, only inbound traffic, or only outbound traffic.
(Optional) Enter the name or number of the access rule that specifies the inbound
traffic to be examined. The ACL that you specify appears in the IPS Rules
Configuration window when the interface with which it is associated is selected.
If you need to browse for the access rule or create a new one, click the ... button.
Cisco Router and Security Device Manager Version 2.2 User's Guide
IPS filters that you want to use to specify the traffic to
IPS Rules
19-37