Ip Address: Ethernet Without Pppoe; Ip Address: Serial With Point-To-Point Protocol - Cisco OL-4015-08 User Manual

IP Address: Ethernet without PPPoE

IP Unnumbered
Dynamic DNS
IP Address: Ethernet without PPPoE
Static IP Address
Dynamic (DHCP Client)
Dynamic DNS

IP Address: Serial with Point-to-Point Protocol

Cisco Router and Security Device Manager Version 2.2 User's Guide
3-6
Click IP Unnumbered if you want the interface to share an IP address that has
already been assigned to another interface. Then, choose the interface whose IP
address you want the interface that you are configuring to use.
Enable dynamic DNS if you want to automatically update your DNS servers
whenever the WAN interface's IP address changes. Click the Dynamic DNS
button to configure dynamic DNS.
Choose the method that the WAN interface will use to obtain an IP address.
If you choose Static IP Address, enter the IP address and subnet mask or the
network bits in the fields provided. For more information, refer to
and Subnet Masks.
If you choose Dynamic, the router will lease an IP address from a remote DHCP
server. Enter the name of the DHCP server that will assign addresses.
Enable dynamic DNS if you want to automatically update your DNS servers
whenever the WAN interface's IP address changes. Click the Dynamic DNS
button to configure dynamic DNS.
Choose the method that the point-to-point interface will use to obtain an IP
address.
Chapter 3 Create Connection Wizards
IP Addresses
OL-4015-08