Sdm Warning: Sdm Will Enable Router Debugs - Cisco OL-4015-08 User Manual

SDM Warning: SDM will enable router debugs...

Have SDM generate VPN Traffic
I will generate VPN traffic from the source network
Continue Button
Close Button
SDM Warning: SDM will enable router debugs...
Cisco Router and Security Device Manager Version 2.2 User's Guide
15-58
Select this option if you want SDM to generate VPN traffic on the interface for
debugging.
Enter the remote tunnel IP address
Enter the IP address of the remote GRE tunnel. Do not use the address of the
remote interface.
Select this option if you want to generate VPN traffic from the source network.
Wait interval time
Enter the amount of time in seconds that the Easy VPN Server is to wait for you
to generate source traffic. Be sure to give yourself enough time to switch to other
systems to generate traffic.
After selecting the traffic generation type you want, click this button to continue
testing.
Click this button to close the window.
This window appears when SDM is ready to begin advanced troubleshooting.
Advanced troubleshooting involves delivering debug commands to the router
waiting for results to report, and then removing the debug commands so that
router performance is not further affected.
This message is displayed because this process can take several minutes and may
affect router performance.
Chapter 15 VPN Troubleshooting
OL-4015-08